Creality CR10 - Locking Bed Level Knobs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bed leveling knob for the Creality CR10 with locking features and tactile feedback.
- Ocena
- 4,6 / 5
- Polubienia
- 45
- Pobrania
- 390
- Wydruki
- 6
- Wyświetlenia
- 1701
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Locking bed leveling knob for the Creality CR10. This design has snap features that keep the knob in place during/in between prints; so no more vibrating out of position or accidentally nudging the knob. The snap features also give tactile feedback so you know how much you have raised/lowered the bed; with this geometry, 1 click will raise/lower the bed .01mm.
This uses the same wheel from my original model that can be downloaded from the link below. Additional instructions can also be found there - https://www.printables.com/model/422895-ender-3-s1s1-pro-locking-bed-level-knob
Shout out to @tyler_280669 who requested the remix and provided the dimensions of the Y plate of the CR10.
Let mw know if there are any problems with the model, as I haven't handled this with the CR10 and was only relying on second hand info to design it.