1 / 3
Laser holder with air-assist for 3018 CNC Router
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A carriage for the laser module for the Sainsmart Genmitsu 3018 CNC router.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 201
- Wydruki
- 0
- Wyświetlenia
- 1609
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (29)Powiązane
A carriage for the laser module for the Sainsmart Genmitsu 3018 CNC router. Slides on to the front of the motor bracket and tightens against it. Includes air-assist conduit. I use a board on the bed that extends at the front by 40mm to allow for the offset.
Print instructions
Print all parts upside down, this way the threads on the knob and insert will print well. Support on build-plate only.