Munchbox and Yumbox lunchbox clasps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement clasps for the "Munchbox" and "Yumbox" branded bento box lunchboxes
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
These are simple clasps that can be used to close “Munchbox” and “Yumbox” style lunchboxes.
Both of the original clasps on these lunchboxes broke, and I found that replacing them was not straightforward, particularly when trying to manage the metal pins required. These designs are very simple, and don't require any other parts.
The clasps snap into place firmly, but they can be easily removed even with little hands by levering them using the small finger grips on either side. We have been using a single printed clasp on our kid's lunchbox for more than 2 years, showing that they are relatively rugged.
The two clasps are essentially interchangeable, as they only differ in their length ("Munchbox" being larger than “Yumbox”).
Printed with PLA and PETG at 0.2 mm layer height with no brim or supports required. PLA is possibly a better option due to its rigidity, but both work well in my experience.