Overhang Test - Vase Mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
How good is your printer / filament really at dealing with overhangs!?
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 502
- Wydruki
- 2
- Wyświetlenia
- 2010
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
How good is your printer / filament really at dealing with overhangs!?
We have all seen the tests for this with infill and opportunities to recover. This test won't give you anything!
This vaze mode print tests your overhang abilities, by going up in the degree of overhang in a constant circular motion. What this does is creates a clear and concise point of failure, enabling you to either:
1) Attempt to improve your printer by using this test to improve results
2) Know the exact limit you can go too without print quality being effected
It is a key aspect to my own project, but now I am making it available to you all.
Jump on twitter and hit me up @polymate3D with your filament, printer, and result! We can start to document up what filaments seem to perform best.
Hope you enjoy :)
Paul - Polymate3D
Print instructions
Print layer height to be 0.10mm. Expect the print to fail. This is the whole point in it. To determine the limit