Mini Magnetic Catan Travel Kit w/ Fantasy Themed Laser Cut Tiles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully magnetic Catan set that can completely fit within a 1kg filament box for travel purposes.
- Ocena
- 0 / 5
- Polubienia
- 54
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 2585
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
Three years ago, I set out to make a Catan board of my own. Fast-forward through a few accidents, mishaps, design flaws, frustrations, and breakthroughs, I am now ready to present my pièce de résistance. If you print and cut all the files I have here, you will have a Catan set that is much smaller in volume and area than the original game, a board that won't be subject to minor table earthquakes, a radically different board design intended to look like a fantasy map, and the satisfying feeling of watching and hearing the magnets snap together.
Video Overview
Apologies in advance for the long video - feel free to watch it in 2x speed. This should give you an idea of how the pieces fit together and how to put together the game. I haven't received the 3x3x3 magnets yet, so the magnetic functionality of the roads, numbers, and ports are not yet included in this video.
Instructions
Materials
- d4 x h5 mm cylinder magnets
- For the full magnetic capability, you'll need 325, but I got mine as a pack of 1000 from AliExpress.
- [Experimental - I have not done this yet] 3 x 3 x 3 mm cube magnets
- For the full magnetic capability, you'll need 148, but I got mine as a pack of 1000 from AliExpress.
- 8 x 10 in (200 x 300 mm) wood sheets, 1/16 in (1.5 mm) thick
- You'll need 2, but I got mine as a pack of 5 from Amazon.
Printing
- The required number of prints for each file is in the description for each file.
- The orientation of each file should be appropriate for printing, but please let me know if I may have missed something. In any case, it should be obvious which way is the best way to print something.
- The hex, edge, and end magnetic bases have built-in supports, which can be easily removed with pliers or tweezers.
- I'd recommend printing the combo holder instead of the individual num and port holders located in the Other Files section, but the Fusion 360 screenshots don't show the combo holder, so it's up to you.
Laser Cutting
- I wanted to go for a fantasy theme to fit the map-like color of the wood I bought, and because I thought it would be cool to make a Lord of the Rings theme. I scrapped that idea after I couldn't make the map features work out though.
- However, I have included a simple version in the Other Files section in case the fantasy theme doesn't fit your tastes.
- The files to cut have “cut” in the names and the files to engrave have “engrave” in the names.
- If you can, cut only one first using the “test_hexagon” file to test tolerances and scales.
- I put in scaling features in the top left corner to help out in case your laser cutting software doesn't automatically help with that.
- I could not find an appropriate brick texture to use with my fantasy theme, so I used castles.
Assembly
- Press-fit the 4x5 magnets in the hex, edge, and end bases. I used tools from a previous project (included in References section), but you may choose to not use them. Warning: this will take a while.
- The inner fences should slide right in to secure the magnets inside.
- The laser-cut tiles can be super-glued on top of the finished tile, but first make sure that the magnets are oriented properly.
- The two 4x5 magnets at the ends of the bases need to be in the same orientation as the magnets that will go on the houses, so proceed with caution here and test your workflow before doing with the whole thing.
- [Experimental - I have not done this yet] Press-fit the 3x3x3 magnets in the number and port bases.
- [Experimental - I have not done this yet] Orient a pair of 3x3x3 magnets so that they are stable on the road sections, and then press-fit the magnets into the roads in that orientation.
Final Notes
The total mass of this should be a little over 1.2 kg (~2.6 lb) when you're done, so it's not exactly lightweight, but I had to sacrifice a few things along the way when optimizing for capability and size.
You may choose to paint your set to help distinguish between the tile textures, but I have not done that yet, since I like the way it looks like now.
I am always appreciative of constructive feedback, so please let me know if you have any questions or suggestions for improvement. Also, please post your makes and remixes. Thanks!
References
- Super Simple Settlers of Catan Board - Instructables
- I laser cut this at 65% scale, which you may see in some of the photos before I decided to design the tiles myself.
- Catan Robber - Sandstorm by deemended - Thingiverse
- I printed this at 60% scale, which fits the “number_mag_base.stl” file.
- Catan Longest Road and Largest Army Trophy by darthgallen - Thingiverse
- I printed these at 60% scale.
- Tic Tac Toe Cubed by TicTacToeCubed - Thingiverse
- I originally bought magnets for this, and I reused the magnetic tools from this to help assemble the bases.