Looney tunes themed fridge magnets/coasters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Looney tunes characters as a fridge magnets that can be also used as a coasters. 3 Characters included.
- Ocena
- 0 / 5
- Polubienia
- 68
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 626
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
If you like these models, please press the like button. If you create these models, please post a make!
These fridge magnets are designed to be usable as a coasters also. 3 Characters from Looney tunes are included and all the models are separated to 3 pieces for easier multi color or multi material prints.
Model includes 3 holes for 5x2mm magnets. If the hole is too tight for 5x2 magnet, just use 4x2mm. Example prints are fully made from pla (lime/black), but use flexible material for more grip for example tpu.
Models:
- Fridge magnet + coaster main body.stl > this is the base model for every character, so print 3 if you are making all the magnets/coasters
Characters: (Marvin the martian, Duffy Duck and Wile E. Coyote)
- Part A - this is the main character
- Part B - This is the honeycomb infill (not required)
Helpful tips for printing:
- 0.2 layer height should be good
- Print the character model flipped, the top against the printing bed for better surface
- Install B parts from behind the A part and use little glue between main body and A+B parts if needed.
- If printing some parts from TPU for example, scale the Z axis just a little bit for increased grip.