Grooving Plane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A groove plane for cutting a groove near the edge of a board, for retaining box or drawer bottoms.
- Ocena
- 5 / 5
- Polubienia
- 94
- Pobrania
- 260
- Wydruki
- 1
- Wyświetlenia
- 1866
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A groove plane for cutting a groove near the edge of a board, for retaining box or drawer bottoms.
Designed to use 6mm x 6mm HSS cutter bit. Cuts a groove ¼" deep ¼" from the edge.
The main version uses a 1/8" x 1/2" flat bar for the sole, I've included a fully printed version as well for anyone wanting to skip the metal portion.
The flat bar for the sole is two pieces, one 30mm long, the other 120mm long, with a mitre cut on one end.
A request via the youtube video was for a 3mm version, so I created the model and uploaded it here, but this version is untested.