Williams High Speed II -- The Get Away traffic light mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace the stock traffic light your Get Away pinball machine with this 3d printed one.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 146
- Wydruki
- 0
- Wyświetlenia
- 760
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I've been updating my Get Away pinball machine and came across the excellent traffic light model OlloG (Williams Getaway - Trafficlight Mod V3.3 by OlloG). The tolerances were a bit loose when I printed it (light inserts just fell out) and I really wanted flat sides and top on mine, so I ended up doing my own model. My model is set up for multi-material printing. I added black to the inside of the sides, top, and bottom, to reduce the light bleed. With the exception of the top and bottom, everything can be printed with layer based color change. Lens holes are designed for 1" play field inserts. I used starburst.
Tolerances or pretty tight on this model. Everything is pretty snap fit when printed on my Mk3 and X1C, but your mileage may vary.