Minimalist Enclosure Filter - HEPA, and activated carbon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Idea was to create a small functional enclosure filter. Uses a 12v 4010 fan and (pepersap) repl. filters (See details)
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 643
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Filter uses a 4010 12v fan no mounting hardware needed. Filter head has some room for making connections and connectors.
It uses (pepersap) replacement filters. Approx. 61mm x 84mm HEPA filters with activated carbon. Google will find them for you, prices are all over the place, do a little searching.
The idea was to make the simplest functional enclosure filter possible that also has activated carbon to remove smells/VOC's. I did however make the base a little oversized to add weight and keep it from being top heavy.
Printed mine in ASA but anything should work, just consider enclosure temperature if using PLA
I printed @ 0.15 layer height to make sure the posts that hold the fan in place were accurate
Let me know if you have any issues with the prints! They worked great for me, but this is one of my first shares so feedback is welcome