Paint Brush Drying Peg (Parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Peg designed to hang off the front of a shelf for drying paint brushes
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 230
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This was originally designed to fit snugly around the edge of a ¾" sheet of plywood to transfer marks around corners. When I put it away on the front of my garage shelf I came up with the idea of adding a peg so I could hang recently cleaned paint brushes over the sink.
As previously mentioned, the file is designed for a ¾" plywood shelf (23/32"), but the F3D file is included and parameterized so you can customize all dimensions as necessary. The pin is a tight fit so it might take a little persuasion or resizing of the hole depending on the accuracy of your printer.