Universal Parallel Clamp Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mountable parallel clamp holders in Single, Double, and Triple variety!
- Ocena
- 4,833 / 5
- Polubienia
- 119
- Pobrania
- 694
- Wydruki
- 6
- Wyświetlenia
- 2436
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a universal (hopefully) parallel clamp holder. I've created 3 versions that can hold a single clamp all the way up to 3 clamps. I only own Jorgensen branded clamps of this type but from what I can tell, the jaw width and bar size is pretty much the same across most brands. I designed this as part of my effort to help organize my shop. It is mounted to a french cleat system, but it can be mounted directly to the wall or a workbench, etc.
For print settings, I printed these all with a 0.25 draft profile with default settings all around. It is designed in such a way that the screws are going to carry the bulk of the load, and reinforce the layers so there's little to no risk of de-lamination or splitting.
This design has gone through quite a few iterations to land on what it is today and I think it works really well and is aesthetically pleasing (to me). Let me know what you think and share any makes as well!
If you want to double check critical dimensions, they are:
Width of Bar Slot: 0.4 inches
Max Jaw Width: 2 inches
Side Note for you Prusa Mini users: the 3 clamp design does fit if you orient it 45 degrees on the bed. You will also have to turn of any skirt loops - it just barely fits :)