1 / 3
SHOPVAC CAMLOCK VACUUM CUFF ADAPTER 50MM TO 40MM ID — zdjęcie 1
1 / 3

SHOPVAC CAMLOCK VACUUM CUFF ADAPTER 50MM TO 40MM ID

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapts any 40mm vacuum want to my 50mm SHOPVAC CAMLOCK fitting.

Ocena
5 / 5
Polubienia
211
Pobrania
972
Wydruki
5
Wyświetlenia
4433
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

DOWNLOAD CAMLOCK and find more accessories HERE.

This part will adapt a 40mm vacuum wand to the new CAMLOCK end.   It should be a slightly loose fit depending on the taper of your vacuum.   I use PFTE plumbers tape to ensure a perfect fit, but a smear of bathroom silicone will make a permanent connection.

Prints without supports.

I have printed in PLA 0.2mm QUALITY settings.  The print may be a little tight when first inserted into the Camlock fitting, that is by design as there is only 0.1mm clearance, but it will ease after a few insertions.
 

Tagi