Bambu Re-Usable Spool - Printed Solid Jessie Filament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A re-usable spool for the Bambu AMS that works for Printed Solid Jessie spools of filament
- Ocena
- 4,833 / 5
- Polubienia
- 38
- Pobrania
- 188
- Wydruki
- 5
- Wyświetlenia
- 1392
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I've had the best luck using third party filament within the AMS unit by ripping off the cardboard sides of the filament and placing the cardboard core over the reusable cores. The Printed Solid Jessie filament, however, has a slightly smaller core than the other filaments and it doesn't fit over the traditional reusable Bambu spools. This is a remix of one of the reusable spools, but I've reduced the size of the center core so that the Jessie spool will fit.
I highly recommend you print this with petg or ASA since pla is quite flimsy. Also probably use 4 perimeters and 35% infill to help give it a more rigid structure.