Smiggle Happy Bento Lunchbox Replacement Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement clip for a Smiggle bento lunchbox.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 1168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A replacement clip for a Smiggle bento lunchbox.
The pictures show the original (green) and the 3D printed replacement (yellow). I was worried the little prong that clicks into the lunchbox would be too brittle when 3D printed, so I made it a bit wider. It feels sturdy enough and the replacement clip holds in place as well as the original.
Update 08-May-2023: Sometimes it's not the clip that breaks, but the pin on the lunchbox that the clip attaches to. I've added three new clip designs with a ball on either the left side, right side, or both sides, for these cases. If the pin hasn't completely broken off, you might need to file it down or even drill a small hole to clip the clip into place.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
50%
Category: Replacement Parts