1 / 3
Mermaid Man Belt & Shell Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just some small changes to Pcaud's Mermaid Man belt & shells. I also wanted the belt buckle in separate pieces.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 238
- Wydruki
- 0
- Wyświetlenia
- 873
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
Just some small changes to Pcaud's Mermaid Man belt & shells. I also wanted the belt buckle in separate pieces so that I can print with ironing on the front of the "M" and also not use supports.
- Scaled up quite a bit and re-meshed to a smoother solid
- Separated the "M" from the belt buckle loops for super gluing individually
Print Settings
Printer: Ender 5
Supports: No
Resolution: 0.2mm
Infill: 5%
Filament: CC3D PLA Silk Gold
Notes:
No supports needed if using the separated "M" & belt buckle loops.