1 / 2
Danish Outlet Faceplate (Stikkontakt Ramme)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shop was sold out of the faceplates I needed so I made some :)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Included are 3 models, a single, a double and a slime! version. As far as I know these will probably only fit Danish outlets but could possibly work on German ones…?
Anyway will probably design some more in the future with hooks or usb ports or something useful.
Printed in PLA and will most likely look best if printed at a smaller layer height, should also print fine without supports but make sure bed adhesion is good as the first layer has some thin parts.