Lego Speed Champions Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to display my Lego Speed Champions on the wall (double sided tape).
- Ocena
- 4,778 / 5
- Polubienia
- 129
- Pobrania
- 772
- Wydruki
- 12
- Wyświetlenia
- 8013
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to display my Lego Speed Champions on the wall using double sided tape. Therefore i made a remix on the 2 projects and looks well :) Be sure to use strong tape or else you will need to rebuild some models ;).
Also added a variant for the new 76914 Ferrari 812 Competizione.
UPDATE 08-01-2024
Added variant for the 76916 Porsche 963
UPDATE 04-08-2024
Added a mirrored model for the 76916 so it can be placed facing right.
Added a model for the Mclaren Solus GT 76918 which again has a different base. Used a 2x3 tile connection for this model to connect to the grey center plate.
Print settings:
Printed with PLA and 0.16 layer
Place upright with the mounting side on the bed (use supports)
Don't print to fast as there are some very small layers (i set no less then 3 seconds per layer for this model)
Tested with:
- 76907
- 76908
- 76911
- 76912
- 76914
- 76915
- 76916
- 76917
- 76918
- 76919
- 76920
- 76925
- 76934