CAMLOCK ADAPTER FOR 40MM ID FITTINGS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ShopVac CAMLOCK adapter to fit inside a nominal 40mm connection point such as my Makita Compound Mitre Saw.
- Ocena
- 4,714 / 5
- Polubienia
- 173
- Pobrania
- 844
- Wydruki
- 7
- Wyświetlenia
- 2940
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DOWNLOAD CAMLOCK and find more accessories HERE.
This fitting suits a 40mm inside diameter, which will fit generic compound mitre saws and inside many standard vacuum cuffs. It fits perfectly on my Makita saw, to allow easy CAMLOCK connect and disconnect. It may be a slightly loose fit depending on the actual machine. In this case I used a few wraps of PFTE plumbers tape to ensure a perfect fit, and held it with the factory securing screw, but a smear of bathroom silicone will make a permanent connection.
Prints without supports.
I have printed in PLA 0.2mm QUALITY settings. The print may seem a little tight when first inserted into the Camlock fitting, that is by design and it will ease after its been worked around a bit.