Star Wars BB-8 Push-along
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Push along BB-8 with magnetic head
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 142
- Wydruki
- 1
- Wyświetlenia
- 1235
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
push along BB-8 toy.
uses two 10mm x 3mm n50 neodymium magnets, once the print is high enough place the magnet inside and let the print finish…. you can pause or throw it in as i did :)
as you can see from photos the magnets are enclosed inside which allows them to move around freely. (1 in body 1in head)
To move the BB-8 you need to hold onto his head and tilt the head back around 10-20 degrees back, and with his body on a good friction ground (like carpet) begin to move.
once you find the sweet spot his body will move and you can direct him.
Forgot to say have also added a swept back sand effect stand to place BB-8 for display when not used