Ikea Lack Enclosure Raiser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to make my Ikea Lack Enclosure a bit higher, so I created a raiser for it.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 1150
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to make my Ikea Lack Enclosure a bit higher, so I took original files and designed them in a way to become a 6cm higher. This includes corner files, walls and wall clip to keep them together.
To raise your Lack Enclosure you're going to need 4 corners, 8 walls, and 4 walls clipping printed.
Remove your enclosure, connect corners with walls and clip the walls together (from top and bottom), put this square onto lower lack table, and then put your enclosure back. Not it's 6cm higher!
This gives you a bit more room for enclosure modifications in its top part.