Elastic Wall Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its the www.elastic.co logo
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- GNU General Public License v2.0
source: https://github.com/ugosan/elastic-wall-lamp
It is composed of 7 3d-printable pieces that were designed to fit together like a jigsaw puzzle and then mounted on a wall. Every individual part has letters on the back so you know which pieces go together.
The inner part is also designed so you could fit a LED strip inside without much effort, and there are holes between each part so you can pass the three wires needed to connect the LED strips.
I have managed to fit a total of 85 LEDs, but I think I could have put less than that and still achieve the same results. I though that the gaps between the strips would be visible as there would be dark spots in the wall, but it turned out quite ok if you set a proper distance, in my case the lamp is 3.5cm (1.5inch) far with the help of the supports.