Pooper Scooper Rake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The wife went out and bought one of these "Pooper Scooper Combos" and the darn thing was over $30!!! I thought that was…
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 206
- Wydruki
- 0
- Wyświetlenia
- 732
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
The wife went out and bought one of these "Pooper Scooper Combos" and the darn thing was over $30!!! I thought that was an outrageous amount!!!
Anyways, here is my version of the "Rake". You print it flat, then using a coffee can (or other round can) you heat the tines for a bit and shape them around the metal can to achieve the round shape. The first one I made, I just used the dowel to shape the tine ends.
Speaking of dowels, you will need a 3/4" wood or metal dowel, (I used an old handle from a broom), to complete this project. The length of the dowel is entirely up to you, I adjusted mine so I don't have to bend over while using it.
A little bit of glue, to stick both ends on, and you'll be all set.
Print Settings
Printer Brand:
Tevo
Printer:
Tarantula Pro
Rafts:
No
Supports:
No
Resolution:
.25mm
Infill:
50%
Filament: Inland Natural PLA+
Notes:
You can lower the infill for the "Handle" but the Rake Head really needs 50% or more.
Category: 3D Printing