ArUco Headphone Head Tracking Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 2-part assembly is used to mount an ArUco paper tracking marker to headphones for head-tracking.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I created this model to mount a 100mm ArUco paper tracking marker to my headphones. The ArUco marker is glued to some a cardboard backing, and then glued to the ‘V’ shaped mounting part. For this, I just used a glue stick.
The bottom piece is attached to the headphones using a flat pad where a 3M strip can be placed. This works well for headphones with a flat headband, like the Arctis 5. For other headphones a custom solution may be needed (see drawings for dimensions of the connector piece)
The two parts are joined together with an adjustable joint that uses a M4x20 bolt and nut. This allows for the exact angle to be tuned more easily, and for the marker to be removed when not in use.