Retro Rose_45 RPM Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My 1st attempt Modeling a Rose for Vase Mode! Inspired by the 45 RPM 7" Record Adapters I grew up on 🤘🤘
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 22
- Wydruki
- 2
- Wyświetlenia
- 202
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
I printed the Twisted Pineapple Vase by Dsk001 at 275%, 375mm High, to fill up my print volume (is 'print volume' correct?)! After I was amazed at how HUGE this thing was, I thought, "What am I gonna put in something so big?!?" So, I designed a Rose... It's big... And it's based off something that puts a smile on my face 😁
I grew up on my Mom's 8-tracks and 45s. That yellow plastic adapter, to me, is so Iconic! This was a really fun Model to create and to those of you who Download/Make it, You ROCK 🤘🤘
Two versions:
Originally designed for 0.5mm Layer Height, but I've also added one for a 0.2mm Layer Height
Rose_45RPM Adapter_1.5 Center Hole_99mm High
> Vase Mode
> Suggest a 0.5mm Layer Height
> 0 Top
> 3 Bottom x 0.5 LH = 1.5
> 1 Perimeter
Rose_45RPM Adapter_0.6 Center Hole_99mm High
> Vase Mode
> Suggest a 0.2mm Layer Height
> 0 Top
> 3 Bottom x 0.2 LH = 0.6
> 1 Perimeter
Stem_45RPM Adapter_375mm High
> Suggest a 0.2mm Layer Height
> 3 Top
> 3 Bottom
> 6 Perimeter
> 0% Infill
* I had issues with the Stem on the first print, so I tried it this way and it came out pretty clean.
V2 of the Stem will come soon. There's one Thorn, which are sharp BTW, that I don't like and I want to redo the top for easier printing.
Commercial Use means you can Make and Sell these! Please let me know if you do, because I think that would be Totally… Freakin… Awesome 🤘🤘