1 / 3
Sunlu 250g Male Spool Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified Male spool adapter for more strength.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 731
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (16)Powiązane
Remix of @Yume's excellent Sunlu 250g spool adapters for Bambu AMS.
I had the male side of the spool adapter snap off when my AMS tried to feed filament without turning the spool. I superglued it back on but it snapped off again so I edited Yume's design to add strength. I just added 3mm inside the spool center to give it more strength against torsion. I also upped the infill to 30% for more strength. The two spool sides can still nest together.