Honeycomb Wall Holder - For 2x Pliers or Cutters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Honeycomb Wall Holder - For 2x Pliers or Cutters
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 351
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Based on @RobBeast design. Re-modelled to similar dimensions but incorporate change to hex insert to match the “insert-empty” hex parts commonly used in the HoneyComb Wall.
Further types of insert-empty can be found here (reduced friction) and here (rotated position).
Hex insert pegs designed with flex in mind so that holder can be inserted without requiring much force to insert or remove from wall.
Additional design change is for part to print without need for supports, the hex inserts are flat to the print bed.
Printed at .20mm layer height (but not limited to)
No support required and works with PLA and PETG.
