Star Trek TR-560 Tricorder VI - Print in Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replica of the TR-560 Tricorder VI from Star Trek: The Next Generation. It prints in place, only requiring…
- Ocena
- 4,5 / 5
- Polubienia
- 56
- Pobrania
- 315
- Wydruki
- 2
- Wyświetlenia
- 1060
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replica of the TR-560 Tricorder VI from Star Trek: The Next Generation. It prints in place, only requiring supports between the hinge segments, & folds closed neatly. (I'd recommend printing it in a different color than pink, but whatever floats your boat!)
I'm figuring out printable adhesive labels for it to finish the look - that'll be a future update.
Live long & prosper!
Print Settings
Printer Brand:
FlashForge
Printer:
Rafts:
Yes
Supports:
No
Resolution:
I went with the highest resolution the printer could handle. Crisp edges!
Infill:
20% is fine. If you want heft, go higher.
Notes:
A little raft never hurt anybody. You might be able to print directly on the bed, but the sides are slightly curved, & it might not end well.
How I Designed This
I found an old, broken Playmates Tricorder, & took some measurements off it with a set of calipers. It was relatively easy to get the open/closed shape for the top & bottom by setting the distance between the vertices equal, & tweaking the angle to look right.
Category: Props