1 / 7
Bambu Lab P1 X1 Filter Cover 11/22
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Models for a flush filter cover and one that holds a hygrometer.
- Ocena
- 4,857 / 5
- Polubienia
- 209
- Pobrania
- 915
- Wydruki
- 17
- Wyświetlenia
- 10 256
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 17) (Komentarze: 45)Remiksy (0)Kolekcje (349)Powiązane
Bambu Lab P1 / X1 Series Filter Cover (4/25/2023)
Designed alternative filter covers for Bambu Lab printers.
Latest Update
11/22/2023
- Added additional size for the X1 filter covers that decreases or increase the distance from the hygrometer to the filer
- Base x1 file has 6.5mm of clearance
- The 5.5 mm version will add more clearance from the build plate but it will lessen the clearance to the filter
- The 7 mm version will add more clearance from the filter but it'll lessen the clearance to the build plate
- Base x1 file has 6.5mm of clearance
5/22/2023
- Added filter cover that works with the hygrometer and the x1/x1c.
- New model now clears the filter in the x1/x1c.
- Big thanks to @mars3142_732125 for the recommendation , testing, and validation.
Files
Main Files
- Filter_Cover_Flush
- Filter_Cover_Hygrometer
- Filter_Cover_Hygrometer_x1
Alternative Files
- Filter Cover with Hygrometer X1 5.5 mm
- Filter Cover with Hygrometer X1 7 mm
Print File
- Filter Cover Print File
Additional Parts
(If using a Hygrometer)
- Hygrometer - https://www.amazon.com/dp/B07GNMKYCZ?psc=1&ref=ppx_yo2ov_dt_b_product_details
- Most of the Amazon ones are the same, as long as the dimensions are 1.89" x 1.13" / 48mm x 28.6mm
Print Orientation
Print Settings
DO NOT USE PLA, IT WILL BREAK. Please use PETG, ASA, PLA+ , etc.
I used Polylite Pro PLA+
Set your K calibration and adjust setting based on your filament
Quality
- Please see build plate file.
Support
- Please see build plate file.
Assembly
- Insert left side first.
- Give the right side a little bend so it'll snap in easier.
- Snap in the center top and bottom.
- To remove, use a small flathead in the area circled below.
If you like my designs and want to say thanks, you can buy me a coffee and help fund the filaments I need for prototyping. A donation of any amount to Buy Me a Coffee or PayPal would be greatly appreciated!