Rugged Stackable USB Storage Box Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gives you another 25mm so older, taller USB drives will fit.
- Ocena
- 5 / 5
- Polubienia
- 83
- Pobrania
- 470
- Wydruki
- 2
- Wyświetlenia
- 3616
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Loved SJB4127's original box, but most of my older drives didn't fit. So I added 25mm of space to the bottom and lid and resized the stacking ring to fit the new size. The 3 new files are included here.
To get the latches and horizontal/vertical bars, just download them from SJB4127's original page. They fit my larger box. Also, I substituted 3mm x 30mm knurled tip dowel pins for the hinges and latches as they fit very cleanly.
I printed everything with Jessie PLA at .2mm Quality, 15% infill and no supports. If you want the stackable feature, you'll probably have to glue in the stackable ring as I could never get it to snap into place.