1 / 5
CR-10S Pro V2 filament sensor Remix for 4 mm PTFE tube — zdjęcie 1
1 / 5

CR-10S Pro V2 filament sensor Remix for 4 mm PTFE tube

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adds the possibility to use a 4 mm PTFE tube with the CR-10S Pro V2 filament sensor.

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
143
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

After printing, the spout should be enlarged by hand with a 4 mm drill to ensure a snug fit of the PTFE tube as is. 

 

Can be printed from any filament.

Tagi