Bronto Bracket - Prusa MK2 / MK3 Filament Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this filament guide to serve as an anchor point for a 4mm PTFE tube running from a filament drybox to clamp…
- Ocena
- 3,5 / 5
- Polubienia
- 6
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 1098
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I designed this filament guide to serve as an anchor point for a 4mm PTFE tube running from a filament drybox to clamp directly to the center of the top of the frame of my Prusa i3 MK2S.
V2 adds a riser for the PTFE port, so it won't hit the extruder at maximum height. That isn't really an issue for 99% of prints, but it tends to be if you raise your Z to the top for maintenance tasks (don't ask me how I know).
There are three versions of the file:
M10 - This one has a threaded hole to accept a PC4-M10 Male Straight Pneumatic PEFE Tube Push Connector
Also included a version with custom supports because it's difficult to add supports with most programs that won't add supports to the M10 threads.
4mm Hole - This one just has a 4mm hole you can use to shove your PTFE tube into, or you could use this one as a normal filament guide
Solid - Not sure why anyone would want this, but you could theoretically print it and drill your own filament holes in it should you desire to do so