Pegboard holder for DualCo grease guns (42mm ID)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for DualCo grease guns, or anything round with an ID under 42mm. Remixed from LocTite single bottle holder.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 683
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Holder for a DualCo grease gun on 1x1/4" MDF pegboard. Should work with other 1" pegboards, but might not fit as well.
The grease gun on the right has a Luer Lock adapter with the fantastic grease brush from Radar Laboratories - I highly recommend it, and if a DualCo gun is too big for your travel case, check out the fantastic lineup of RadLabs syringes for your grease.
Printing Instructions
Nothing special, I usually enforce supports to the upper pegs but sometimes print without supports and it still works well. I generally print with a 0.3mm layer height to make it quicker and results are great.