1 / 3
Adorable(r) Bunny Magnets - Easy to print tiny bunny magnets to make your fridge happy. Appreciate the likes and downloads. Thanks! :) — zdjęcie 1
1 / 3

Adorable(r) Bunny Magnets - Easy to print tiny bunny magnets to make your fridge happy. Appreciate the likes and downloads. Thanks! :)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cute remix of AdorableBunnies - a good way to use the magnets you bought on Amazon. Easy quick print.

Ocena
0 / 5
Polubienia
22
Pobrania
62
Wydruki
0
Wyświetlenia
377
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Adorable(er) little bunny magnets that are easy and quick to print and a great way to make neodymium magnets cute.  The little ears provide some grip to lift the bunnies off the fridge in a humane way. Updated cuteness of ears, tail, and an added button nose.

Finally tried to pause at layer in a print. Super easy.  Printed at 0.15 to facilitate increased cuteness.

Instructions:

1. Choose an Adorable Bunny with an internal hole big enough for the magnets you have and open it in your slicer. Not super up to 8mm x 1mm.  Just make sure the height is enough.

2. Preview the file and slide through the layers until you get to the last layer for the hole before it closes in.  In Prusaslicer you can right click the little plus sign and choose ‘add pause print’ 

3. Print the Adorable Bunny and your printer will pause when it is time to drop in a magnet.  Then choose the resume option on your printer.

4. Present the Adorable Bunny Magnets to your partner and kids and take joy in them sincerely liking something you have made.  (For a change in my case :) )

 

Hope you Like and download em' :)