panda bear necklace/ multicolor files for panda
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
printable chain with panda bear/multicolor printfiles(my bear is painted)
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 660
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
printable chain with panda bear/multicolor printfiles(my bear is painted)
Print instructions
There are two parts:
-The chain is simmilar to my squirrel necklace, so you need good bed adhesion and well adjusted material to print the chain.
I choose the layerhigh(depend on the slicer)in that way to get a clear first bridging, like you could see on one of the pictures.
panda bear: 1 extruder (panda.stl and panda_support.stl)
-The support on the panda bear is included. You can remove it carefully with a smal scissors.
-One panda bear_stl is without support, so you could add the support in your own way
-I print the bear at 0.12mm layer high.
-paint it like a panda bear
Finaly connect the two parts like you see it on the photo!
I add multicolor files: 2 colors:
panta_multi_white_fin and panda_multi_black_fin