Korum fishing chair rear rod rest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rear rod-rest attachment for the original Mk1 Korum accessory chair.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 1060
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
A rear rod-rest attachment for the original Mk1 Korum accessory chair. Designed to take 1/4" (7mm) rods/dowel, and includes an anti-'poke yourself in the shin' sleeve.
Requires 2 x 45mm (thread length) M6 bolts. Print main body with 4 shells and 35% infill for strength. Sleeve: 3 shells, concentric surface infill, wide brim recommended.
Print instructions
Unassociated tags: korum accessory chair , korum chair, rear rod rest, rod rest
Category: Sport & Outdoors Summary
A rear rod-rest attachment for the original Mk1 Korum accessory chair. Designed to take 1/4" (7mm) rods/dowel, and includes an anti-'poke yourself in the shin' sleeve.
Requires 2 x 45mm (thread length) M6 bolts. Print main body with 4 shells and 35% infill for strength. Sleeve: 3 shells, concentric surface infill, wide brim recommended.
Print Settings
Printer Brand: Creality
Printer: Any
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 35%
Notes:
Use a wide brim when printing the sleeve to aid bed adhesion.