Creality Sermoon-D1 Z-Axis Wobble Suppressor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade to compensate for small misalignments in the T8 lead screws/couplings that causes wobbling of the screw.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 155
- Wydruki
- 2
- Wyświetlenia
- 1288
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Print the parts with thick walls and top/bottom layers (2.4 mm.) Use 40% infill. It needs to be strong.
In addition you will need:
2x 688ZZ (or 688-2RS) ball bearings (8x16x5 mm)
4x M4x10 Allen Head screws with washers
4x M4 T-nuts
4x 15x2 mm O-rings
Assembly instructions:
Strap on 2 O-rings to each bearing and insert them into the bearing cavity
Press fit the bearing caps over each bearing
Mount the each assembly to the corresponding vertical 40x20 Aluminum extrusions.
NOTES:
The brass nuts must have some sideways play on the bed frame for this to work properly.
This will NOT fix a badly bent/misaligned T8 lead screw.