Coleman Cooler Lid Prop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got tired of our scout troop's coolers getting put away wet/damp and getting moldy.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 617
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got tired of our scout troop's coolers getting put away wet/damp and getting moldy. So, I designed a prop to hold the lid open partway to allow air to move through and prevent this.
The prop was designed to fit onto the front lip of the Coleman 50qt Xtreme wheeled cooler, but I think it will fit just as well on many of the other Coleman Xtreme series coolers. And, it'll probably work on a lot more.
Print instructions
Category: Outdoor & Garden Summary
I got tired of our scout troop's coolers getting put away wet/damp and getting moldy. So, I designed a prop to hold the lid open partway to allow air to move through and prevent this.
The prop was designed to fit onto the front lip of the Coleman 50qt Xtreme wheeled cooler, but I think it will fit just as well on many of the other Coleman Xtreme series coolers. And, it'll probably work on a lot more.
Print Settings
Printer Brand: Prusa
Printer: Prusa Clone
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2mm
Infill: 20
Notes:
Printed at 0.2mm with 0.8mm walls and 20% infill and it's very strong. Less infill would probably produce a perfectly usable thing with less filament.