1 / 2
Ender 5 Belt Tensioner Remix - Vertical Screws — zdjęcie 1
1 / 2

Ender 5 Belt Tensioner Remix - Vertical Screws

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ender 5 Belt Tensioner Remixed to span vertical and horizontal extrusions and add a little clearance for extra Y travel.

Ocena
5 / 5
Polubienia
28
Pobrania
259
Wydruki
4
Wyświetlenia
1267
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Remixed George's excellent design to adjust the Y axis tensioners to align the 2 attachment screws vertically instead of horizontally.  I went with the vertical alignment for 2 reasons:  

1) The tensioner now spans the vertical and horizontal extrusions like the original tensioner bracket, which provides some corner bracing support

2) Gained a little bit of extra clearance on the Y extrusions for a little more Y travel.  I have a MicroSwiss NG extruder, as well as an EZ-ABL mounted on my print head that sticks out too far, so needed to gain a little extra Y travel to preserve the original print area. 

Print the parts according to the original instructions, replacing the left and right Y parts for these.  The rest of the parts are the same → https://www.printables.com/model/312432-ender-5-pro-plus-belt-tensioner-x-and-y/files.  

 

I printed it all solid in 3D Fuel Pro PLA and it seems to be strong enough, but time will tell if I will need to reprint in PETG or ABS.  

Tagi