end panel for upgraded IC-705 interface to Hardrock-50 amplifier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New end panel for the upgraded interface between the Hardrock HR50 amplifier and the Icom IC-705
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The interface upgrade to have the Hardrock HR50 amplifier communicate with the Icom IC-705 allows the radio to communicate with the amp using the Icom tuner function. It adds an extra 3.5mm jack but the upgrade kit does not include a new end panel; the instructions call for the user drilling a hole or leaving the end of the enclosure open. I messed up drilling a hole so I made this :-)
The text in the print is a little hard to read but it labels the “tuner” jack and the “send/alc” jack for the appropriate connections to the radio. The .3mf file is set up for a 0.6 nozzle as was used for the print in the photo, so this could be improved with a smaller nozzle (I did use Arachne perimeters). I also include the Fusion 360 file.