M5 knob (customable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple M5 knob for everything where it can be used e.g. sunroof regulation for Beach loungers There's 2 version - one…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v2.0
Simple M5 knob for everything where it can be used e.g. sunroof regulation for Beach loungers
There's 2 version - one with S dimension set to 8mm, and 2nd with 7.5mm - i have some issues on my printer with 8mm m5 nut (for some reasons the S dimension was 9mm v:), so you can use 7.5mm version if you'll have similar problem. You can also use smaller version for tighter nut mount - but you'll have to use heat gun or hair dryer to heat up the part and push nut into it
There's also CAD file, so you can easly customize knob for your needs by editing spreadsheet values
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
20
Filament: Doesn't matter PLA, but PETG/ABS may be better choice for higher temperatures
Category: 3D Printing