ZeroG Hydra WobbleX Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Like WobbleX by MirageC and use Hydra by Zerog? Well now use both!
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 192
- Wydruki
- 0
- Wyświetlenia
- 1799
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
link: https://s.click.aliexpress.com/e/_DDdeMyP Buy 3 or more. (MirageC affiliate link)
What did I modify?
1. Thickened the hydra arms to allow for spots to insert the shafts for WobbleX.
2. Added the WobbleX logo.
3. Removed MGN12C screw spots for Hydra MGN12.
4. Removed Heatsets for connecting the lead screw nuts to the hydra legs.
5. Increased the size around the lead screw to allow for the wobble!
IMPORTANT:
Whenever you are going to be flipping over your machine a good idea is to remove the bed since even without WobbleX it can crack the mini tanks!
These files require a reprint due to the added spacing around the lead screws.
These files are untested as I haven't received my WobbleXs yet, there is the possibility that bearings will be needed at the top of the lead screws (I can't test this setup for months so anyone willing to test would be appreciated)
If you want to communicate with me my discord on the Zerog discord is, Burgo. Minus Foot lettuce#2730