1 / 5
Baitcube / Köderbox - Sammelbox fürs Angeln / Fishing - easy change Baits / Lure — zdjęcie 1
1 / 5

Baitcube / Köderbox - Sammelbox fürs Angeln / Fishing - easy change Baits / Lure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Baitcube / Köderbox

Ocena
0 / 5
Polubienia
11
Pobrania
59
Wydruki
0
Wyświetlenia
1554
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

ENGLISH__

Easy change your fishing lure.. :) I designed this Baitcube to have a nice Holder for Baits. All normal Baits should fit in. Also you can dry your baits in it, before they get back in Fishingbox and you can change them really quick. The height is 14,5cm. If you need it a little heigher, scale it a bit in z-axis. As you can see on the Pictures you can clamp the Baitcube to your Belt or Fishingbox.

Print it with 2 Shells and 0.22-0.24 Layer for faster printing. Two Shells are also good, because it's more flexible and lighter. Support is don't need it, except for the Holder on the backside. Pla works, but PETG is better. The best i think is harder TPU Filament.

GERMAN__

Einfacher Tausch der Köder... :) Ich habe diesen Köderbox/Baitcube entworfen, um unterwegs schnell mal die Köder zu tauschen und nicht immer alles in der Box/Tasche zu suchen. Ihr könnt die Köder darin auch perfekt abtrocknen lassen, bevor sie wieder in die Angeltasche kommen. Alle normalen Standard-Größen sollten passen. Er ist 14,5cm hoch. Wenn ihr ihn höher braucht, einfach in der Z-Achse etwas vergrößern. Der Baitcube kann am Gürtel oder der Angeltasche/box befestigt werden.

Druckt die Datei mit 2 Wänden und 0.22-0.24 Layer für einen schnelleren Druck. 2 Wände sind außerdem gut, weil der Baitcube dann flexibler und leichter ist. Pla geht, aber PETG ist besser. Oder noch besser ist hartes TPU!

Print Settings:

  • Printer brand: Anycubic
  • Rafts: No
  • Supports: Yes (for the backside only)
  • Resolution: 0.22
  • Infill: 5-10

Tagi