1 / 7
Torque wrench holder for ikea skaids T-Nuts - hazet 5122-2 CT
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Torque wrench holder for skadis
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 306
- Wydruki
- 4
- Wyświetlenia
- 1568
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (1)Kolekcje (111)Powiązane
Simple torque wrench holder for a hazet 5122-2 CT and others.
The inner diameter is 23mm.
The holder has a deepening on the back to make the wrench fit better and lies flat.
I printed my holder with 4 perimeters and a little support on the back.
What you need:
M2 T-Nut, M2 nuts and M2 12mm screws are needed for mounting.
The holder uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178.
For more Skadis add-ons, check out my other models ;-)