1 / 1
Sunny Exercise Bike End Cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement end cap for the feet on a Sunny SF-B1002 exercise bike
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The end caps for the feet on the Sunny SF-B1002, are, well, awful. They fall out constantly and are a general nuisance. What I have made is an upgraded end cap that no longer has a cutout in the middle, and has an additional rib for extra grip.
Print Settings
- Your pick on filament - I used PLA
- With supports for overhangs
- These are a bit of a pain to clean up, just use a pair of needle nose
- It doesn't need to be perfect, it will end up inside the bike
- Print face down
Installation
- Line it up square to the bike and knock it in straight - that's it! It's a nice tight fit.