1 / 9
Skywalker 1900 canopy 45g servoplate — zdjęcie 1
1 / 9

Skywalker 1900 canopy 45g servoplate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

NewUPDATE: Well, all files are here.

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
162
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

NewUPDATE: Well, all files are here. Everything fits nice, the only original part from shniggysaurus canopy is the bottom and backplate.

Print only one packplate, and one frontplate. The frontplate is like the backplate, but a little bit shorter so that the VTX will fit inside the new mountarea.

OldUpdate: Works fine, but im doing some more mods for this one. Will be ready in a few hours.

New mods dont just include the top plate, its modded to fit a 1.2ghz VTX in the back and also a hole on the top plate to put wires in to behind the servo mount.

I have uploaded a full scale STL-file of the new version when everything is fitted together.
End of Updates

Just a remix of shniggysaurus canopy to fit a 45g 360 degree servo in the top plate.

Download the rest from shniggysaurus original canopy here:
http://www.thingiverse.com/thing:1161617

My Tilt/Pan design thats mounted on the canopy is here:
http://www.thingiverse.com/thing:1374253

Print instructions

Category: R/C Vehicles Summary

NewUPDATE: Well, all files are here. Everything fits nice, the only original part from shniggysaurus canopy is the bottom and backplate.

Print only one packplate, and one frontplate. The frontplate is like the backplate, but a little bit shorter so that the VTX will fit inside the new mountarea.

OldUpdate: Works fine, but im doing some more mods for this one. Will be ready in a few hours.

New mods dont just include the top plate, its modded to fit a 1.2ghz VTX in the back and also a hole on the top plate to put wires in to behind the servo mount.

I have uploaded a full scale STL-file of the new version when everything is fitted together.
End of Updates

Just a remix of shniggysaurus canopy to fit a 45g 360 degree servo in the top plate.

Download the rest from shniggysaurus original canopy here:
http://www.thingiverse.com/thing:1161617

My Tilt/Pan design thats mounted on the canopy is here:
http://www.thingiverse.com/thing:1374253

Tagi