Improved Clasp Hook for Gridfinity Toolbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the clasp hook for the parametric Gridfinity toolbox
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 458
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Remix of the clasp from the parametric Gridfinity toolbox. The default one is very difficult to remove, especially if the fit is tight. This version adds a lip that makes it much easier to remove. This is a very satisfying clasp to operate.
Includes a parameterized SCAD file in case you need to change anything.
Printed with 0.2mm layer height, 20% infill, no supports, no brim. It has an entirely flat side that lays flat on the printer bed, making it a pretty easy print. The 0.2mm layer height is important, though. This part is just too small for a larger layer height.