Repair/Replacement for a sliding door handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is for repairing/replacing a old sliding door that got damaged with time/sun/rain/usage.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
1.- Motivation
This model is a replacement/repair of door handle (and screen door handle) from our saloon to the garden, the old plastic got damaged due to age/sun/rain/usage, therefore, having a 3D printer and some Fusion360 skills, I decided to print a replacement one.
The crater is 119.6 x 19.8 mm therefore for fastening tight, I printed without any tolerance, this allowed me to push it into the door as required..
If needed, drop me a note and I can upload a different size for you, free of charge :)
2.- Printing requirements
For a good handle feeling, print the model with the crater facing up as in the provided STL file. above.
This requires support to be added for the borders, but the support points will not disturb the quality of the model. (The supports in the face that is in contact with the door frame).
The model can be printed using regular PLA, but any material can be used.
3.- Change Log
- Uploaded - 2023-Apr-24 - Initial Version
4.- Last Words
Please don't forget to ★ Rate and ❤ Like
Post your Makes to earn Prusameters!
Do not hesitate to ask questions, feedback is essential to making better models.
You are kindly invited to follow me to get updated when upload new models.
Hope it was not TL;DR
Happy printing & Greetings from the Galilee.