Eryone Thinker S SE runout switch for direct drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed this to go inline with my direct drive extruder.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to reuse the Z endstop switch and found this enclosed case for it. Remixed it to be as small as I could and thread directly into the extruder feeder. The case is shaped so you can still release pressure on the extruder feeder and function as it should. Simple clean filament runout switch for your direct driven Eryone Thinker S or SE. I used a threaded insert but its not needed. The V3 I added a tab to the cover to help keep it closed. Enjoy
Edit - Made a fancy one with an inlay. Align both prints and do the inlay first, then the body and cap in whatever color combo you want. I also did away with the threaded insert in favor of integrated clips. If you want the clips but no inlay just print both “fancy” files aligned on the buildplate at the same time.