Prusacaster with Guitarfetish Dual Load Bridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusacaster core section modified slightly to accept a GuitarFetish Dual Load bridge, and a standard Fender neck plate.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 1238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Modified core section of the Prusacaster to use a standard dual-load bridge from Guitarfetish. No need to source the hard-to-find Thomann/Harley Benton weirdo bridge!
The neck pocket hole spacing has been changed to a standard Fender neck plate spacing, since I used a non-kit neck with no predrilled holes.
When printing I enlarged the pickup cavity (again to accomodate more pickups than HB), and filled in the neck pickup and pickguard holes by adding parts in the slicer.
This has made an Esquire type, and I wired the pickup selector to change tone capacitor values.
The external dimensions are the same, so all the other Prusacaster parts will fit no problem.