Swing Lounger Chair Cupholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a clamp-on cupholder for a swing lounger chair with a ~41mm tube steel frame.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 496
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Nothing beats sitting in a swing lounger on a nice day, but you need to be able to reach your drink!
This cup holder is designed to clamp around a tube steel frame and clamp into place with M2.5 bolts. The horizontal bolt that joins the cup and the clamp can be secured with a nut, the two vertical bolts will cut threads as they go in.
STEP and Fusion 3D files are included in case you'd like to adjust for a differently sized tube frame. The one in the model measured at a little under 42mm.
When printing, I used a .2mm height with 3 perimeters and 50% grid infill. On the cup, the overhang where the bolts connect at the end of the clamp needs support as it prints in thin air. I recommend painting in support as seen in the included screenshot. For the clamp, automatic supports of the overhang should work fine.
I've included two 3MFs with pre-painted supports, one for Bambu Studio and one for Prusaslicer.